The essential distinction between offline and online is that an offline process is one of construction; an online process, one of execution. In media production, online usually follows offline, as in the case of video editing, where a product that has been laboriously constructed in an offline edit suite—perhaps over the course of days or weeks—is executed by machinery following an edit decision list (EDL) in minutes or hours in an online suite.
Since the hourly rate of a well appointed online suite is typically several orders of magnitude higher than that of a small offline studio—often equipped with not much more than a desktop computer running editing software—the distinction between online and offline has long been etched into the steely heart of many a production manager.
Applying this distinction to the field of music, you might say that playing an instrument is generally an online process, and requires the talent to perform. Constructing a musical performance using MIDI step input, for example, is an offline process, and requires a different skill set.
Before Bing Crosby teamed up with Jack Mullin back in 1947 and seized on the potential for splicing tape offline to construct complete recorded performances, recording musicians had to execute a complete work flawlessly to the end while it was being recorded direct to phonograph disc—an online process. If they made a mistake, they had to go back to the beginning, scrap the disc, and start all over again.
Likewise, dialing a phone on a traditional land line is an online process. If you realize you’ve made a mistake, you have to abort—hang up—and begin again. Dialing a cell phone, on the other hand, is an offline process. You compose the number and, if you make a mistake, you go back a step and delete the wrong input—edit it out—and input the right number. When the entire telephone number has been constructed to your liking, you go online—literally, hit the green online button—and the call is executed by the service provider.
The ability to edit is what distinguishes offline from online processes.
Sound mixing for film used to be mostly an online activity. It was common practice in the early decades of film sound for an entire 10-minute reel to be mixed in a single pass, following one or more rehearsals. With the development of pick-up and record electronics for film dubbers making punching in possible, the two- or three-person re-recording team enjoyed the ability at last to go back and fix a flawed portion of a mix—usually refining their console settings listening to the sound backwards while the dubbers rewound in real time—without causing undue delay and excessive cost to the production.
Mix automation changed all that, from the introduction of console automation systems in the 1970s to today’s digital audio workstations featuring the ability to graph not just volume and mute, but just about every conceivable control parameter. Automation has allowed the offline construction of mixes to become standard operating procedure, with the mix being subsequently executed online in a single record pass or internal bounce-to-disk.
Now this has all changed again with the introduction of offline bounce in ProTools 11. This enables freezing a mix—that is, rendering the final mix up to 150 times faster than real time, according to Avid—and has made the notion of “online” something of a quaint curiosity.
Now a mix need never be onlined at all, since we are able to render into a single final file something that doesn’t ever need to be played through, prior to the playback for quality control checking and approval, after the fact.
The notion of online vs. offline, once so central to the production process and necessitating the development of the all-important EDL, is in the process of being relegated to the status of a quaint curiosity, a byway in the development of modern studio practices and procedures. It will soon be forgotten, along with such other bygone realities as the daily tape recorder alignment ritual, analog noise reduction devices, and uniformed gas station attendants.
It brings to mind the day that I finally sold my once invincible Synclavier and 16-track Direct-to-Disk recorder—to a couple of vintage synth collectors, no less. The only things I hung onto were two blank rack panels and an AC power bar. Some things, at least, are irreplaceable.
Showing posts with label phase cancellation. Show all posts
Showing posts with label phase cancellation. Show all posts
Saturday, April 13, 2013
Tuesday, September 14, 2010
Plan ahead for split-track recording when making documentary videos
A wedding videographer came to me last week with an audio problem in a wedding video he was editing. Just before their first dance as husband and wife, the happy couple had taken to the dance floor with handheld mics to sing a torch ballad over a karaoke track. A huge crowd-pleaser, this would have been a "highlight" of the wedding video. Unfortunately, on tape the backing track was so loud that the lyrics were completely unintelligible—in fact, you couldn't hear the man's voice at all. Could I save the track? And his reputation?
In a nutshell, no, not this time. The voices were so faint in the two-track mono mix and the electric piano so loud that no amount of EQ could bring them forward. The client even sent me the original wav file of the karoake track, hoping that if I mixed it out of phase (reversed polarity) with the botched recording, it would cancel out some of the music track, leaving the voices more intelligible.
For the cancellation trick to work, the music in the end recording would have to be almost identical to the original karoake file. It wasn't: the karaoke was in stereo not mono, and it ran slightly faster than in the final recording.
Moreover, there was tons of ambience in the duet recording, because the karaoke playback was picked up not only directly from the audio mixer at line level, but also from the loudspeakers in the hall by the singers' microphones. So the final recording is muddied and colored by the reproduced sound from the loudspeakers and all sorts of reflection from the walls and floor, which, of course, is not present in the original track.
This also partially explains why the music was so much louder than the vocals: the music was being picked up twice, once as a direct feed, and secondly from the singers' microphones.
What should the operator have done? Since the goal was apparently not to make a stereo recording—no attempt was made to preserve the original left-right stereo of the instrumental track in making a two-track mono recording—the operator should have fed both sides of the original instrumental track to track 1 of the camera, and the microphones to track 2.
This simple split-track technique would have allowed for the voices to be properly balanced with the music in post production. It's done all the time in recording dialog for films and TV on 2 tracks, especially when there is a mic on a boom or fishpole, and the actors are wearing lavs. Boom goes to track 1, lavs to track 2.
When shouting and screaming are anticipated in a scene (perhaps not at a wedding), the same audio is printed on both tracks but at a reduced level—say, 10 dB lower than normal—on track 2. So if the scream is distorted on track 1, the sound editor can lay up the lower, undistorted scream from track 2, and match the levels during mixdown.
It's simple and it works. It just requires a little planning ahead, but when you only have one shot at it, split-track recording can save the day. And your reputation.
In a nutshell, no, not this time. The voices were so faint in the two-track mono mix and the electric piano so loud that no amount of EQ could bring them forward. The client even sent me the original wav file of the karoake track, hoping that if I mixed it out of phase (reversed polarity) with the botched recording, it would cancel out some of the music track, leaving the voices more intelligible.
For the cancellation trick to work, the music in the end recording would have to be almost identical to the original karoake file. It wasn't: the karaoke was in stereo not mono, and it ran slightly faster than in the final recording.
Moreover, there was tons of ambience in the duet recording, because the karaoke playback was picked up not only directly from the audio mixer at line level, but also from the loudspeakers in the hall by the singers' microphones. So the final recording is muddied and colored by the reproduced sound from the loudspeakers and all sorts of reflection from the walls and floor, which, of course, is not present in the original track.
This also partially explains why the music was so much louder than the vocals: the music was being picked up twice, once as a direct feed, and secondly from the singers' microphones.
What should the operator have done? Since the goal was apparently not to make a stereo recording—no attempt was made to preserve the original left-right stereo of the instrumental track in making a two-track mono recording—the operator should have fed both sides of the original instrumental track to track 1 of the camera, and the microphones to track 2.
This simple split-track technique would have allowed for the voices to be properly balanced with the music in post production. It's done all the time in recording dialog for films and TV on 2 tracks, especially when there is a mic on a boom or fishpole, and the actors are wearing lavs. Boom goes to track 1, lavs to track 2.
When shouting and screaming are anticipated in a scene (perhaps not at a wedding), the same audio is printed on both tracks but at a reduced level—say, 10 dB lower than normal—on track 2. So if the scream is distorted on track 1, the sound editor can lay up the lower, undistorted scream from track 2, and match the levels during mixdown.
It's simple and it works. It just requires a little planning ahead, but when you only have one shot at it, split-track recording can save the day. And your reputation.
Labels:
karaoke,
mono,
phase cancellation,
recording,
split track,
unintelligible,
video,
videographer,
voices,
wedding
Subscribe to:
Posts (Atom)
